European Substation Transformer

European Substation Transformer

~
Send Inquiry

Shandong Xunchi Electric Co., Ltd. is one of the leading manufacturers and suppliers of european substation transformer in China. With abundant experience, we are committed to providing high quality customized products with low price. If you're going to wholesale durable european substation transformer made in China, welcome to get free sample from our factory.

 

Product Overview

A European-style prefabricated substation packs three things into one enclosure: HV switchgear, the distribution transformer, and LV distribution equipment. Everything is assembled and wired at the factory before it leaves. What it replaces is the old-style substation with its own masonry building, and it does the same work - stepping voltage down, distributing, metering, protecting - on a tenth to a fifth of the ground. The site crew sets it down, runs the cable, and goes.

Key Specifications

ItemDetailRated capacity100 to 2,500 kVA, up to 5 MVA on request

High voltage6–35 kVLow voltage

0.4 kV or 0.69 kV

Frequency50 Hz, 60 HzTransformeroil-immersed (hermetically sealed) or cast-resin dry-type

Enclosure protection

IP30 to IP54Standards

IEC 60076, IEC 62271-202, GB/T 17467

Design

Inside, it reads as three rooms: high voltage, transformer, low voltage, each walled off from the others, laid in a row or in a triangle. The shell is steel, corrosion-treated and lined so it holds heat in and keeps weather out, which is what lets the thing sit outdoors with nothing over it. HV compartment takes ring-main units, load switches or SF6 gear, and the mechanical interlocks are there so a live door stays shut. The transformer bay swallows oil-filled or dry-type units and is ventilated off a thermostat. Distribution, metering and compensation gear sit in the LV compartment.

No building to put up

Civil works fall out of the project, and a good slice of the cost falls with them. Runs to the load get shorter, so less cable is needed.

Tested before it ships

All the wiring is finished and tested at the works. Commissioning on site becomes days of work instead of weeks.

HV schemes picked to suit the network

Ring-main, terminal, dual-source; whatever the grid on that site calls for. Compensation and monitoring (MODBUS, wireless) can be added where the smart-grid side asks for them.

Grounding and interlocks

Grounding runs through the whole unit. HV operations are interlocked, so no one opens a live compartment. Cores are low-loss, keeping the design inside the EU Ecodesign efficiency thresholds.

Where it gets used

City housing and commercial blocks, factories, hospitals, and renewable projects (solar, wind, storage) that need a connection point to the grid. Temporary construction supply and EV charging hubs use the same box. Standard builds assume sites under 1,000 m and −25 °C to +40 °C; anything outside that range gets specified case by case.

Compliance

Built and type-tested against IEC 60076, IEC 62271-202 and GB/T 17467. Utilities in the UK and Europe can also order ENA TS 35-2 and EcoDesign Tier 2 versions.

Hot Tags: european substation transformer, China european substation transformer manufacturers, factory, Modular Packaged Substation, MV Prefabricated Substation, Skid Mounted Substation, YB MV Prefabricated Substation, YB Prefabricated 33kV Substation, yb prefabricated substation